Our advanced equipment is designed to boost productivity with its performance.
Downloadable brochures and spec sheets for current and non-current models are here.
ENGINE
| Model | Isuzu AH-6HK1X |
| Type | 4-cycle water-cooled, direct injection |
| Aspiration | Turbocharger and intercooled |
| No. of cylinders | 6 |
| Maximum power DIN 6272, Without Fan net | 179 kW (243 PS) at 2 000 min-1 (rpm) |
| Maximum power SAE J1349, Without Fan net | 179 kW (240 HP) at 2 000 min-1 (rpm) |
| Maximum power ISO 9249, Without Fan net | 179 kW (240 HP) at 2 000 min-1 (rpm) |
| Maximum power EEC 80 / 1269, Without Fan net | 179 kW (240 HP) at 2 000 min-1 (rpm) |
| Bore and stroke | 115 mm x 125 mm |
| Piston displacement | 7.790 L |
| Batteries | 2 x 12 V / 916 CCA, 270-min. rated reserve |
| Air cleaner | Two element dry type with restriction indicator |
|
|
|
POWER TRAIN
| Transmission | Torque converter, countershaft type powershift with computer-controlled automatic shift and manual shift features included. |
| Torque converter | Three element, single stage, single phase |
| Main clutch | Wet hydraulic, multi-disc type |
| Cooling method | Forced circulation type |
| Travel speed* (km/h) | |
|
|
|
AXLE AND FINAL DRIVE
| Drive system | Four-wheel drive system |
| Front & rear axle | Semi-floating |
| Front | Fixed to the front frame |
| Rear | Trunnion support |
| Reduction and differential gear | Two stage reduction with torque proportional differential |
| Oscillation angle | Total 24 degree (+12 degree , -12 degree) |
| Final drives | Heavy-duty planetary, mounted inboard |
TIRES (tubeless, nylon body)
| Drive system | 23.5-25-16 PR (L3) |
| Optional | Refer to standard & optional equipment list |
BREAKS
| Service brakes | Inboard mounted fully hydraulic 4 wheel wet disc brake. Front & rear independent brake circuit |
STEERING SYSTEM
| Type | Articulated frame steering |
| Steering mechanism | Refer to standard & optional equipment list |
| Steering angle | Each direction 40 degree ; total 80 degree |
| Cylinders | Two double-acting piston type |
| Cylinders No. x Bore x Stroke | 2 x 70 mm x 542 mm |
| Minimum turning radius at the centerline of outside tire | 5 715 mm |
HYDRAULIC SYSTEM
Arm and bucket are controlled by independent control lever
| Arm controls | Four position valve ; Raise, hold, lower, float |
| Bucket controls with automatic bucket return-to-dig control | Three position valve ; Roll back, hold, dump |
| Main pump / Steering pump | Variable Displacement Axial Plunger Pump |
| Charging pump / Fan pump / Brake and assist pump | Fixed Displacement Type Gear Pump |
| Hydraulic cylinders Type | Two arm and one bucket, double acting type |
| Hydraulic cylinders No. x Bore x Stroke | Arm : 2 x 130 mm x 940 mm Bucket : 1 x 165 mm x 530 mm |
| Filters | Full-flow 15 micron return filter in reservoir |
| Hydraulic cycle times Lift arm raise | 5.6 s |
| Hydraulic cycle times Lift arm lower | 3.2 s |
| Hydraulic cycle times Bucket dump | 1.3 s |
| Hydraulic cycle times Total | 10.1 s |
SERVICE REFILL CAPACITIES
| Fuel tank | 340.0 L |
| Engine coolant | 41.0 L |
| Engine oil | 25.0 L |
| Torque convertor & transmission | 25.0 L |
| Front axle differential & wheel hubs | 40.0 L |
| Rear axle differential & wheel hubs | 40.0 L |
| Hydraulic oil tank | 114.0 L |
BUCKET SELECTION GUIDE
